FixVault
Home › Chrysler › 2006 › 300 Base, 42RLE/VLP › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System (Service Information) › Sensor-Front Wheel Speed › Removal › RWD

Sensor-Front Wheel Speed: Removal: RWD

  1. Raise and support vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
    Fig 1: Locating Speed Sensor Cable Routing Clip At Brake Tube Bracket
    GC0014082Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove sensor cable routing clip (2) from brake hose bracket (3).
    Fig 2: Releasing Wheel Speed Sensor Connector
    GC0012975Courtesy of DAIMLERCHRYSLER CORP.
    NOTE: To release sensor connector from body wiring harness connector (1) in following step, move retaining clip (2) as indicated here, then pull sensor connector (3) outward.
    Fig 3: Locating Speed Sensor Cable Routing Clip At Brake Tube Bracket
    GC0014082Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove sensor connector (1) from body wiring harness connector (4).
    Fig 4: Wheel Speed Sensor At Front Knuckle
    GC0014058Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove screw (3) fastening wheel speed sensor to knuckle (1). Pull sensor head (4) out of knuckle.
  5. Remove wheel speed sensor cable routing clip (2) from brake hose routing bracket (5).
About FixVault