FixVault
Home › Chrysler › 2006 › 300 Base, 42RLE/VLP › Repair and Diagnosis › Transmission › Automatic Trans › Engine & Automatic Transmission Cooling System › Engine › Engine Coolant Temp Sensor › Removal › 2.7L Engine

2.7L Engine

Fig 1: Engine Coolant Sensor - 2.7L
GC0014703Courtesy of DAIMLERCHRYSLER CORP.
1 - ENGINE COOLANT SENSOR
2 - ELECTRICAL CONNECTOR
3 - COOLANT OUTLET TUBE
  1. Disconnect negative battery cable.
  2. Partially drain cooling system (Refer to COOLING - STANDARD PROCEDURE) .
  3. Disconnect the electrical connector (2).
  4. Remove engine coolant sensor (1) from coolant outlet tube (3).
About FixVault