FixVault
Home › Chrysler › 2006 › Crossfire Base, 2D Convertible › Repair and Diagnosis › External Pages › Different car › Section 26 (Fuel System) › Fuel Injection › O2 Sensor › Installation

O2 Sensor: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oxygen sensor. See Figure.
  2. Install the heatshield and tighten fasteners to 9N.m (80 lbs. in.). See Figure.
  3. Properly position the oxygen sensor wiring harness and connect the electrical connector. See Figure.
  4. Connect the negative battery cable.
About FixVault