FixVault
Home › Chrysler › 2006 › PT Cruiser Base, 2D Convertible, Automatic › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel Injection (Except Diesel) › O2 Sensor › Removal › 1/1 Upstream - 2.0/2.4L

1/1 Upstream - 2.0/2.4L

Fig 1: Locating Oxygen Sensor (1/1 Upstream & 1/2 Downstream)
GC0021612Courtesy of DAIMLERCHRYSLER CORP.
1 - DOWN STREAM O2 SENSOR
2 - UP STREAM O2 SENSOR
  1. Remove the air cleaner lid and makeup air hose.
  2. Remove the negative battery cable.
  3. Disconnect electrical connector from sensor.
  4. Remove sensor using an oxygen sensor special tool C-4907.
About FixVault