FixVault
Home › Chrysler › 2006 › PT Cruiser Base, 2D Convertible, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Engine Cooling System & Automatic Transmission Cooling System › Engine › Sensor-Engine Coolant Temp › Removal › 1.6L Engine

1.6L Engine

Fig 1: Removing/Installing Engine Coolant Temperature Sensor
GC0021809Courtesy of DAIMLERCHRYSLER CORP.
1 - ENGINE COOLANT TEMPERATURE SENSOR
  1. Disconnect negative battery cable.
  2. Disconnect positive battery cable.
  3. Remove battery.
  4. Partially drain cooling system.
  5. Disconnect engine coolant temperature sensor electrical connector.
  6. Remove engine coolant temperature sensor (1). See Fig 1.
About FixVault