Cruise Control Systems: Servo: Installation

Fig 1: Cable Clip

Courtesy of DAIMLERCHRYSLER CORP.

1. Install clip attaching cable to servo. See Fig 1.
   Fig 2: Cable to Servo Mounting

   Courtesy of DAIMLERCHRYSLER CORP.
2. Install two nuts attaching mounting bracket and speed control cable to servo. See Fig 2.
3. Tighten nuts to 6.8 N.m (60 in. lbs.).
   Fig 3: Vacuum Hose

   Courtesy of DAIMLERCHRYSLER CORP.
4. Connect electrical connectors and vacuum hose. See Fig 3.
   Fig 4: Servo & Bracket

   Courtesy of DAIMLERCHRYSLER CORP.
5. Install the servo bracket bolt. See Fig 4
6. Tighten bolt to 5.6 N.m (50 in. lbs.).
7. Connect the negative battery cable.