FixVault
Home › Chrysler › 2006 › Sebring GTC › Repair and Diagnosis › Body & Frame › Windows › Interior & Exterior › Weatherstrip/Seals › Header Weatherstrip Retainer/Molding › Installation

Header Weatherstrip Retainer/Molding: Installation

  1. Clean any residual seal material from header panel.
  2. Position header weatherstrip retainer on vehicle.
  3. Install screws attaching retainer to header panel. Install center screw first and then work outward.
  4. Install screws attaching A-pillar weatherstrip retainer to header retainer.
  5. Install L foam in upper corner starting at upper screw on the A-pillar retainer.
  6. Install L foam in upper corner starting at upper screw on A-pillar.
  7. Install header and A-pillar weatherstrip.
  8. Lower and secure convertible top.
About FixVault