Warning Lamp Announcement

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.

The cluster may request a single, multiple chimes, or a continuous chime after illuminating the following indicators:

Low Fuel Warning Indicator:

The LFW indicator will only be turned on when the Fuel Gauge pointer is in between 1/8 position and 'E'. A single chime request will be sent to the BCM.

Engine Coolant Temperature Warning Indicator:

When the gauge indicates a Temperature High condition (245°F/118°C), the cluster will request a single chime and illuminate the warning indicator.

When the coolant temperature gauge indicates a Temperature Critical condition (260°F/120°C) the cluster will request a continuous chime and begin flashing the warning indicator.

Charging System Warning Indicator:

The cluster will request a single chime and illuminate the warning indicator for a Voltage High (16 volts) or voltage low (10 volts) condition.

Low Engine Oil Pressure Warning Indicator:

The cluster will request a single chime and illuminate the warning indicator when the engine is operating above 450 RPM and the oil pressure drops below 4 psi/27.5 kPa.

Engine Oil Temperature Warning Indicator:

The cluster will request a single chime and illuminate the warning indicator when the gauge indicates a Temperature High (290°F/144°C) condition. The cluster will request a continuous chime and begin flashing the warning indicator when the gauge indicates a Temperature Critical (300°F/160°C) condition.

Decklid Ajar Indicator:

The cluster illuminates the indicator if the BCM Bus message has decklid ajar.

Fasten Seat Belt Indicator:

The Cluster will illuminate the warning indicator and request a chime when the ACM PCI bus message indicates that the driver seat belt is not buckled.

Check Engine Indicator:

The cluster will request a single chime after the indicator is illuminated.