FixVault
Home › Chrysler › 2006 › Sebring GTC › Repair and Diagnosis › External Pages › Different car › Section 115 (HVAC Systems) › Controls › A/C Heater Control › Installation

A/C Heater Control: Installation

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the A/C-heater control onto the instrument panel center bezel.
  2. Install the screws that secure the A/C-heater control to the instrument panel center bezel. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Connect the wire harness connectors to the back of the A/C-heater control and install instrument panel center bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - INSTALLATION) .
About FixVault