Blower Motor Relay: Installation
WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to the fuse and relay map on the cover of the power distribution center (PDC) for blower motor relay location.
- Position the blower motor relay into the proper receptacle of the PDC.
- Align the blower motor relay terminals with the terminal cavities in the PDC receptacle and push down firmly on the relay until the terminals are fully seated.
- Close the cover of the PDC.
- Reconnect the negative battery cable.