FixVault
Home › Chrysler › 2006 › Sebring GTC › Repair and Diagnosis › External Pages › Different car › Section 115 (HVAC Systems) › Distribution › Blower Motor › Installation

Blower Motor: Installation

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align and install the blower motor into the HVAC housing.
  2. Install the screws that secure the blower motor to the HVAC housing. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Connect the air intake duct to the blower motor.
  4. Connect the wire harness connector to the blower motor.
  5. Reconnect the negative battery cable.
About FixVault