FixVault
Home › Chrysler › 2006 › Sebring GTC › Repair and Diagnosis › External Pages › Different car › Section 16 (Suspension System) › Front › Spring Stop Plates › Installation

Spring Stop Plates: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the spring stop plate to the lower control arm. Tighten the bolts to 60 N.m (44 ft. lbs.).
  2. Install the stabilizer link to the spring stop plate.
  3. Install the tire and wheel assembly.
  4. Lower the vehicle.
About FixVault