Installation - (DRW)
WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Larger spring bushing goes toward the front.
- Install the spring shackle to the spring (if removed). See Figure. Tighten to 185 N.m (136 ft. lbs.).
- Install the spring to the front spring bracket. See Figure. Tighten to 185 N.m (136 ft. lbs.).
- Install the spring to the rear spring bracket. See Figure. Tighten to 185 N.m (136 ft. lbs.).
- Raise the rear axle and attach the spring plate and U-bolts. See Figure. Tighten to 170 N.m (125 ft. lbs.).
- Lower the vehicle.