FixVault
Home › Chrysler › 2006 › Sebring GTC › Repair and Diagnosis › External Pages › Different car › Section 75 (Cruise Control Systems (Service Information)) › Switch › Installation

Section 75 (Cruise Control Systems (Service Information)): Switch: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the wiring to the column.
  2. Connect the electrical connectors on the steering column.
  3. Install the screw (1) attaching the speed control switch to the multifunction switch.
    4. Fig 1: Removing/Installing Screw Attaching Speed Control Switch To Multifunction Switch
    GC0032378Courtesy of DAIMLERCHRYSLER CORP.
  4. Install the lower instrument panel. (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL ASSEMBLY - INSTALLATION) .
  5. Install the clockspring. (Refer to ELECTRICAL/RESTRAINTS/CLOCKSPRING - INSTALLATION) .
  6. Install the steering wheel. (Refer to STEERING/COLUMN/STEERING WHEEL - INSTALLATION) .
  7. Connect the negative battery cable.
About FixVault