FixVault
Home › Chrysler › 2006 › Sebring GTC › Repair and Diagnosis › External Pages › Different car › Section 82 (HOMELINK Universal Transmitter) › Universal Transmitter › Installation

Universal Transmitter: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Universal Garage Door Opener/Tire Pressure Monitor (TPM) Module
GC0032973Courtesy of DAIMLERCHRYSLER CORP.
  1. Connect the harness connector to the Universal Garage Door Opener/Tire Pressure Monitor module.
  2. Install the Universal Garage Door Opener/Tire Pressure Monitor module by snapping it into the headliner.
  3. Connect the negative battery cable.
About FixVault