FixVault
Home › Chrysler › 2006 › Sebring GTC › Repair and Diagnosis › Restraints › Restraints Control Systems › Air Bag Restraint Systems › Curtain Airbag › Removal

Curtain Airbag: Removal

  1. Disconnect and isolate the battery negative remote cable.
  2. Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
  3. Remove the Headliner. Refer to HEADLINER .
  4. Disconnect the wire harness connector from the rear of the inflator.
  5. Remove the retaining bolt to the front tether at the instrument panel on the A-pillar.
  6. Remove the five short retaining bolts along the roof line.
  7. Remove the four long retaining bolts to the rear along the roof line and at the C-pillar.
  8. Remove all push fasteners and discard. Make sure they are completely removed.
  9. Remove the curtain airbag from the vehicle.
About FixVault