Driver Airbag: Removal

Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
Remove speed control switch screws from steering wheel back cover, remove switches and disconnect the wires.
Remove two bolts retaining Driver Airbag.
Lift airbag and disconnect the two airbag initiators and horn switch wire connectors.
Remove Driver Airbag from vehicle.

WARNING: WHEN REPLACING A DEPLOYED DRIVER AIRBAG, THE CLOCK SPRING MUST ALSO BE REPLACED. REFER TO REMOVAL AND INSTALLATION . FAILURE TO DO SO COULD RESULT IN OCCUPANT PERSONAL INJURY OR DEATH.