FixVault
Home › Chrysler › 2006 › Sebring GTC › Repair and Diagnosis › Restraints › Restraints Control Systems › Air Bag Restraint Systems › Seat Belt Height Adjuster › Installation › Notes

Seat Belt Height Adjuster: Installation: Notes

  1. Place seat belt height adjuster into position.
  2. Install two bolts attaching seat belt height adjuster to B-pillar. Torque bolts to 40 +/- 8 N.m (29.5 +/- 6 ft. lbs.).
  3. Install upper B-pillar trim panel.
  4. Install the bolt attaching the turning loop to the height adjuster. Torque bolt to 40 +/- 8 N.m (29.5 +/- 6 ft. lbs.).
  5. Install turning loop cover and adjuster knob.
About FixVault