FixVault
Home › Chrysler › 2006 › Sebring GTC › Repair and Diagnosis › Transmission › Automatic Trans › Engine & Automatic Transmission Cooling System › Engine › Coolant Pressure Container - 2.7L › Installation

Coolant Pressure Container - 2.7L: Installation

  1. Connect heater hose to coolant pressure container.
  2. Install container in mounting position and install attaching screws.
  3. Connect the coolant outlet connector hose to the bottle.
  4. Snap washer hose into groove on coolant pressure container.
  5. Install the air conditioning receiver/dryer attaching screw.
  6. Install the power steering reservoir attaching screw.
  7. Fill cooling system ((Refer to COOLING - STANDARD PROCEDURE) ).
About FixVault