FixVault
Home › Chrysler › 2006 › Town & Country Base › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules › Memory Seat/Mirror Module › Removal

Memory Seat/Mirror Module: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the driver side front bucket seat retaining nuts from under the vehicle (Refer to BODY/SEATS/SEAT - REMOVAL) .
  3. Lift the drivers seat up and out of the mounting holes in the floor pan and lay the seat rearward to access the module located under the seat.
  4. Disconnect the memory seat/mirror module electrical connectors. Depress the retaining tab and pull straight apart.
  5. Remove the module retaining bolts and remove the module from the bracket.
About FixVault