Power Liftgate Control Module: Removal

1. Disconnect and isolate the battery negative cable.
2. Remove the left D-pillar trim panel from the vehicle. (Refer to BODY/INTERIOR/LEFT D-PILLAR TRIM PANEL - REMOVAL)
3. Disconnect the wire harness connections from the power liftgate motor assembly.
4. Remove the screw holding the power liftgate control module to the D-pillar. See Fig 1.
5. Remove the power liftgate control module from the vehicle.

Fig 1: Power Liftgate Control Module

Courtesy of DAIMLERCHRYSLER CORP.

1 - POWER LIFTGATE CONTROL MODULE

2 - RETAINING SCREWS

3 - D-PILLAR

4 - POWER LIFTGATE MOTOR

5 - ELECTRICAL CONNECTORS