FixVault
Home › Chrysler › 2007 › 300 Base › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Module - Door › Removal

Module - Door: Removal

Fig 1: Door Module Location
GC0015853Courtesy of CHRYSLER LLC
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. Refer to STANDARD PROCEDURE .
  1. Disconnect and isolate the battery negative cable.
  2. Remove front door trim panel. Refer to REMOVAL .
  3. Disconnect electrical harness connectors.
  4. Remove mounting fasteners and module.
About FixVault