FixVault
Home › Chrysler › 2007 › 300 Base › Repair and Diagnosis › Engine Mechanical › Mechanical › 2.7L Engine (Service Information) › Engine Block › Windage Tray › Removal

Windage Tray: Removal

Fig 1: Locating Battery
GC0015222Courtesy of CHRYSLER LLC
  1. Disconnect negative battery (1) cable located in the trunk.
  2. Raise vehicle.
    Fig 2: Lower Splash Shield
    GC0015233Courtesy of CHRYSLER LLC
  3. Remove lower splash shield retaining bolts (1) and splash shield (2).
    Fig 3: Locating Engine Mount Bolts, Drain Plug And Filter
    GC0015226Courtesy of CHRYSLER LLC
  4. Remove oil filter (3).
  5. Remove oil pan (4). See REMOVAL .
    Fig 4: Windage Tray
    GC0015320Courtesy of CHRYSLER LLC
  6. Remove oil pump pickup tube (2).
  7. Remove windage tray/outer main bearing cap bolts (3).
  8. Remove windage tray (1).
About FixVault