FixVault
Home › Chrysler › 2007 › 300 Base › Repair and Diagnosis › Engine Mechanical › Mechanical › 2.7L Engine (Service Information) › Engine Mounting › Mount - Left › Installation

Mount - Left: Installation

Fig 1: Removing Mount
GC0015348Courtesy of CHRYSLER LLC
  1. Install engine mount isolator (1) in place.
    Fig 2: Left Mount Adapter
    GC0015347Courtesy of CHRYSLER LLC
  2. Attach left engine mount isolator (1) to engine mount adapter (2). Install bolts and tighten to 75 N.m (55 ft. lbs.).
  3. Lower engine but do not do not let mount contact frame.
  4. Install engine mount studs and tighten to 12 N.m (106 in. lbs.).
    Fig 3: Locating Engine Mount Bolts, Drain Plug And Filter
    GC0015226Courtesy of CHRYSLER LLC
  5. Lower engine and remove lifting device.
  6. Tighten engine mount isolator nuts (1) to 75 N.m (55 ft. lbs.).
    Fig 4: Lower Splash Shield
    GC0015233Courtesy of CHRYSLER LLC
  7. Install lower splash shield (2) and tighten retaining bolts (1).
  8. Lower vehicle.
    Fig 5: Air Cleaner Housing
    GC0015232Courtesy of CHRYSLER LLC
  9. Install air cleaner housing assembly (3). See INSTALLATION .
    Fig 6: Locating Battery
    GC0015222Courtesy of CHRYSLER LLC
  10. Connect negative battery (1) cable.
About FixVault