FixVault
Home › Chrysler › 2007 › 300 Base › Repair and Diagnosis › Engine Mechanical › Mechanical › 2.7L Engine (Service Information) › Engine Mounting › Mount - Rear › Installation

Mount - Rear: Installation

Fig 1: Removing Transmission Mount Bolts
GC0012844Courtesy of CHRYSLER LLC
  1. Install mount to transmission bolts (2) and tighten to 47 N.m (35 ft.lbs.).
    Fig 2: Locating Transmission Mount, Crossmember & Bolts
    GC0012701Courtesy of CHRYSLER LLC
  2. Install cross member (1) and attaching bolts. Tighten bolts to 68 N.m (50 ft.lbs.).
  3. Lower transmission so cross member to mount bolts (2) can be started tightened by hand.
  4. Lower transmission and remove jack.
  5. Tighten mount bolts (2) to 47 N.m (39 ft.lbs.).
About FixVault