Solenoid - EVAP/Purge: Removal

Fig 1: Locating Proportional Purge Solenoid - 5.7L

Courtesy of CHRYSLER LLC

The solenoid attaches to a bracket near the right rear of the engine. The solenoid will not operate unless it is installed correctly.

1. Location for 5.7L engine.
   Fig 2: Locating Proportional Purge Solenoid - 2.7L/3.5L

   Courtesy of CHRYSLER LLC
2. Location for 2.7 and 3.5L engine.
3. Disconnect electrical connector from solenoid.
4. Disconnect vacuum tubes from solenoid.
5. Remove solenoid from bracket.