FixVault
Home › Chrysler › 2007 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 114 (Power Windows (Service Information)) › Power Window Switch › Removal › Front

Power Window Switch: Removal: Front

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Window Switch Removal (Rear Shown - Front Similar)
GC0022982Courtesy of DAIMLERCHRYSLER CORP.
Fig 2: Front Window Switch
GC0022983Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Using a trim stick (1) (special tool #C-4755) or equivalent, gently pry at the top of the switch.
  3. Remove switch and disconnect electrical harness connector.
About FixVault