FixVault
Home › Chrysler › 2007 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 130 (Power Seat System) › Power Seat Switch › Installation

Power Seat Switch: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install switch and two attaching screws to bezel.
  2. Connect wiring to switch.
  3. Install screws to left cushion side shield.
  4. Connect the battery negative cable.
  5. Verify system operation.
About FixVault