Switch-Oil Pressure Sensor: Installation
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - OIL PRESSURE SWITCH |
| 2 - ENGINE OIL COOLER |
| 3 - ENGINE OIL FILTER |
- Apply Mopar® Thread Sealant to the switch (1) threads.
- Install oil pressure switch (1) to fitting. See Fig 1.
- Connect electrical connector.
- Lower vehicle.
- Start engine and check for leaks.
- Check engine oil level and adjust as necessary.