FixVault
Home › Chrysler › 2007 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 58 (Charging System) › Generator › Installation › 2.7L

Section 58 (Charging System): Generator: Installation: 2.7L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removal/Install Generator
GC0015632Courtesy of DAIMLERCHRYSLER CORP.
  1. Install generator.
    Fig 2: Removing/Installing Upper Bolt
    GC0015631Courtesy of DAIMLERCHRYSLER CORP.
  2. Install upper bolt mounting bolt.
    Fig 3: Removing/Installing Lower Bolts
    GC0015630Courtesy of DAIMLERCHRYSLER CORP.
  3. Install 2 lower mounting bolts.
  4. Tighten bolts to 65 N.m (48 ft. lbs.).
    Fig 4: Generator Without Belt
    GC0015629Courtesy of DAIMLERCHRYSLER CORP.
  5. Install B+ terminal nut and wire. Tighten nut to 13 N.m (115 in. lbs.).
  6. Connect generator field circuit plug.
  7. Install generator drive belt. Refer to COOLING .
  8. Connect negative battery cable.
About FixVault