FixVault
Home › Chrysler › 2007 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 60 (Vehicle Theft Security System (Service Information)) › Intrusion Module - Export › Installation

Intrusion Module - Export: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the intrusion module on the passenger side of the instrument panel and connect the electrical connector.
  2. Install and tighten the two fasteners that secure the module to the instrument panel.
  3. Install the glove box (Refer to BODY/INSTRUMENT PANEL/GLOVE BOX - INSTALLATION) .
  4. Connect the battery negative cable.
About FixVault