FixVault
Home › Chrysler › 2007 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 60 (Vehicle Theft Security System (Service Information)) › Intrusion Module - Export › Removal

Intrusion Module - Export: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the glove box (Refer to BODY/INSTRUMENT PANEL/GLOVE BOX - REMOVAL) .
  3. Reach up behind the instrument panel and remove the two retaining screws to the intrusion module.
  4. Disconnect the electrical connector to the intrusion Module.
  5. Remove the module from the instrument panel.
About FixVault