Rod - Piston & Connecting: Inspection
WARNING: This page is about a different variant/trim than selected.
Check the connecting rod journal for excessive wear, taper and scoring. Refer to ROD - PISTON & CONNECTING .
Check the connecting rod for signs of twist or bending.
Use the proper tool when removing the piston clip. If the clip is pried out, a burr may form on the groove that will inhibit pin removal and installation.
Check the piston for taper and elliptical shape before it is fitted into the cylinder bore. Refer to ROD - PISTON & CONNECTING .
Check the piston for scoring, or scraping marks in the piston skirts. Check the ring lands for cracks and/or deterioration.