Retractor - Seat Belt: Removal: Front

Fig 1: Front Seat Belt

Courtesy of CHRYSLER LLC

1. Disconnect and isolate the battery negative cable.
   WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
2. Remove trim cover (3) from the seat cushion outboard trim cover.
3. Remove seat belt (1) lower anchor nut (2) from seat cushion frame.
   Fig 2: Trim Cover

   Courtesy of CHRYSLER LLC
4. Remove the upper turning loop (3) trim cover (2).
5. Remove the upper turning loop retaining bolt (4).
   Fig 3: B-Pillar Trim

   Courtesy of CHRYSLER LLC
6. Remove the lower B-pillar trim. Refer to REMOVAL .
   Fig 4: Front Seat Belt Web Guide

   Courtesy of CHRYSLER LLC
7. Remove the one screw (2) to the front seat belt web guide (3).
   Fig 5: Seat Belt Tensioner

   Courtesy of CHRYSLER LLC
8. Disconnect the tensioner (2) squib connector (3).
   Fig 6: Front Seat Belt Retractor

   Courtesy of CHRYSLER LLC
9. Remove the one screw between the upper retractor indexing tabs in B-pillar.
10. Remove the one front seat belt retractor (4) retaining bolt (3).
11. Pull the retractor inboard and release the indexing tabs (2) from the B-pillar (1).