FixVault
Home › Chrysler › 2007 › 300 Touring, AWD › Repair and Diagnosis › Body & Frame › Windows › Power Windows (Service Information) › Power Windows - Service Information › Power Window Switch › Removal › Power Window Switch

Power Window Switch

NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. Refer to STANDARD PROCEDURE .
  1. Disconnect and isolate the battery negative cable.
  2. Remove rear door trim panel. Refer to REMOVAL .
  3. Remove switch (1) from door trim panel (2).
    Fig 1: Locating Power Window Switch & Door Trim Panel
    GC0016484Courtesy of CHRYSLER LLC
About FixVault