Engine Mount - Left
WARNING: This page is about a different car, the 2007 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
- Install the engine mount to the engine block and tighten the bolts to 20 Nm (177 in. lbs.) and then an additional 90 degrees.
- Install the left mount bracket bolts and tighten to 35 Nm (26 ft. lbs.).
- Lower the vehicle.
- Lower the engine into the engine mounts.
- Raise and support the vehicle.
- Install the engine mount to cradle bolt and tighten to 53 Nm (26 ft. lbs.).
- Connect the negative battery cable.