FixVault
Home › Chrysler › 2007 › Crossfire Base, 2D Convertible › Repair and Diagnosis › Suspension › Front Suspension › Suspension System › Wheel Alignment › Standard Procedure › Check And Adjust Front Caster/Camber › Checking

Check And Adjust Front Caster/Camber: Checking

  1. Observe the general information on chassis alignment check. See STANDARD PROCEDURE .
  2. Check the vehicle level at the front and rear axles. See STANDARD PROCEDURE .
  3. Check the vehicle level at the front and rear axles with an electronic inclinometer and adjust if necessary. See STANDARD PROCEDURE .
  4. Check the camber and assign to tabular value. See SPECIFICATIONS .
    NOTE: Measure with the wheels turned to 20°.
  5. Check the caster and assign to tabular value. See SPECIFICATIONS .
About FixVault