FixVault
Home › Chrysler › 2007 › Crossfire Limited, 2D Convertible, Standard › Repair and Diagnosis › Suspension › Wheel Alignment › Suspension System › Front Suspension › Lower Control Arm › Installation › Lower Control Arm

Lower Control Arm

Fig 1: Locating Bolts Attaching Lower Control Arm To Frame
GC0033651Courtesy of CHRYSLER LLC
  1. Install the lower control arm to the vehicle.
  2. Install the two bolts (1) attaching the lower control arm to the frame. Tighten to 120 N.m (88 ft. lbs.).
    Fig 2: Locating Lower Ball Joint Nuts
    GC0033646Courtesy of CHRYSLER LLC
  3. Install the nut (2) attaching the lower control arm to the steering knuckle lower ball joint. Tighten to 45 N.m (33 ft. lbs.).
    Fig 3: Locating Sway Bar Clamp Nuts
    GC0033650Courtesy of CHRYSLER LLC
  4. Install the sway bar clamp and bolts (1) to the lower control arm. Tighten to 20 N.m (15 ft. lbs.).
    Fig 4: Locating Shock Absorber Bolt & Nut
    GC0033648Courtesy of CHRYSLER LLC
  5. Install the shock absorber bolt and nut (1) to the lower control arm. Tighten to 55 N.m (41 ft. lbs.).
    Fig 5: Compressing Front Spring
    GC0033649Courtesy of CHRYSLER LLC
  6. Install the front spring (1). See INSTALLATION .
  7. Lower the vehicle and check vehicle alignment. See STANDARD PROCEDURE .
  8. Install the front wheel and tire assembly. Refer to STANDARD PROCEDURE .
About FixVault