FixVault
Home › Chrysler › 2007 › Crossfire Limited, 2D Coupe, Automatic › Repair and Diagnosis (Single Page) › Engine Performance › Fuel Delivery › Fuel System › Fuel Injection › Map Sensor › Removal › Map Sensor

Map Sensor

Fig 1: Locating Manifold Absolute Pressure Sensor
GC0032353Courtesy of CHRYSLER LLC
  1. Disconnect the negative battery cable.
  2. Remove the engine cover. Grasp both corners of the engine cover, and pull up firmly.
  3. Disconnect the Manifold Absolute Pressure (MAP) sensor harness connector.
  4. Remove the retaining bolt (1).
  5. Remove the MAP sensor.
About FixVault