Sensor-Engine Coolant Temp: Removal: Removal-2.0/2.4L: Turbo

Fig 1: Engine Coolant Temperature Sensor - 2.4L Turbo

Courtesy of CHRYSLER LLC

1 - COOLANT OUTLET CONNECTOR

2 - ENGINE COOLANT TEMPERATURE SENSOR

1. Disconnect negative battery cable.
2. Partially drain cooling system below level of engine coolant temperature sensor (2).
3. Remove upper torque strut. Refer to STRUT-TORQUE .
4. Disconnect engine coolant temperature sensor electrical connector.
5. Remove engine coolant temperature sensor (2).