FixVault
Home › Chrysler › 2007 › Pacifica Base, 3.8 L › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Electronic Control Modules - Service Information › Module-Powertrain Control › Removal › Powertrain Control Module

Powertrain Control Module

Fig 1: PCM Location
GC0000028Courtesy of CHRYSLER LLC
  1. Disconnect the negative battery cable.
  2. Raise vehicle and support.
  3. Remove the left front wheel.
  4. Remove the left front splash shield.
    Fig 2: PCM Assembly
    GC0000030Courtesy of CHRYSLER LLC
  5. Unlock and remove the 4 connectors. See Fig 1.
  6. Remove the 3 mounting screws. See Fig 2.
  7. Remove the PCM.
About FixVault