FixVault
Home › Chrysler › 2007 › Pacifica Base, 4.0 X › Repair and Diagnosis › Electrical › Gauges › Navigation System & Telecommunication System (Service Information) › Navigation/Telecommunication - Service Information › Navigation Unit › Removal › Navigation Unit

Navigation Unit

  1. Disconnect and isolate the battery negative cable.
  2. Remove rear floor stowage tray. Refer to REMOVAL .
  3. Remove mounting fasteners. See Fig 1.
    Fig 1: Navigation Unit
    GC0002418Courtesy of CHRYSLER LLC
    1 - ANTENNA CABLE - NAVIGATION
    2 - ELECTRICAL HARNESS CONNECTOR
    3 - NAVIGATION UNIT
  4. Disconnect electrical harness connector and antenna cable from navigation unit.
  5. Remove navigation unit from mounting bracket.
About FixVault