Manifold Absolute Pressure (Map) Sensor - 2.7L

Fig 1: Locating MAP Sensor

Courtesy of CHRYSLER LLC

1. MAP sensor location.
2. Remove the negative battery cable.
   Fig 2: Identifying MAP Sensor Electrical Connector

   Courtesy of CHRYSLER LLC
3. Disconnect the electrical connector from the MAP sensor.
   Fig 3: Turning MAP Sensor To Remove/Install

   Courtesy of CHRYSLER LLC
4. Turn sensor counterclockwise.
   Fig 4: Lifting Sensor To Remove

   Courtesy of CHRYSLER LLC
5. Lift sensor to remove.