FixVault
Home › Chrysler › 2007 › Sebring Base, 2.4 K › Repair and Diagnosis › Transmission › Automatic Trans › Engine & Automatic Transmission Cooling System › Engine › Sensor-Engine Coolant Temperature › Removal › Removal-2.0/2.4L › Cylinder Block Mounted

Cylinder Block Mounted

Fig 1: Identifying ECT Sensor
GC0058755Courtesy of CHRYSLER LLC
1 - ECT
  1. Disconnect negative battery cable.
  2. Partially drain cooling system below level of ECT Sensor.
  3. Disconnect ECT Sensor electrical connector.
  4. Remove ECT Sensor.
About FixVault