FixVault
Home › Chrysler › 2008 › 300 Touring, RWD › Repair and Diagnosis › Electrical › Charging Systems › Battery System › Battery System › Battery HOLDDOWN › Installation › Battery HOLDDOWN

Battery HOLDDOWN

Fig 1: Battery Hold Down Clamp
GC0015602Courtesy of CHRYSLER LLC
  1. Install the battery holddown clamp and bolt. Tighten the bolt to 4 N.m (35 in. lbs.).
  2. Connect the battery negative cable.
  3. Install the rear compartment floor trim panel.
About FixVault