FixVault
Home › Chrysler › 2008 › Pacifica Touring, AWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Cruise Control Systems › Speed Control › Switch - Speed Control › Installation › Switch - Speed Control

Switch - Speed Control

Fig 1: Switch Mounting Screw
GC0002503Courtesy of CHRYSLER LLC
  1. Connect electrical connector to switch.
  2. Install switch and mounting screw to steering wheel. Tighten Screw.
    Fig 2: Airbag Removed
    GC0002504Courtesy of CHRYSLER LLC
  3. Install driver side airbag, refer to INSTALLATION .
    Fig 3: Steering Wheel & Switches
    GC0002502Courtesy of CHRYSLER LLC
  4. Connect negative battery cable, tighten nut to 5 N.m (45 in. lbs.).
About FixVault