Diagnostic Test
WARNING: This page is about a different car, the 2008 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- INTERNAL IPM FAILURE
Connect the scan tool to the Data Link Connector.
Turn the ignition on.
With the scan tool, erase DTC's.
Turn the ignition off then turn the ignition on and wait approximately 1 minute.
With the scan tool, read DTC's.
Did this DTC reset?
Yes
- Replace the IPM in accordance with the service information.
- Perform BODY VER TEST - VER 1 .
No
- Test Complete.