FixVault
Home › Chrysler › 2008 › Sebring Limited, 2D Convertible › Repair and Diagnosis › External Pages › Different car › Section 217 (Power Distribution System) › OUTLET, Power, Center Console › Installation › Installation

OUTLET, Power, Center Console: Installation: Installation

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install base mount ring.
  2. Connect the electrical connector.
  3. Firmly snap base into position inside of the center console.
  4. Connect the battery negative cable.
About FixVault