FixVault
Home › Chrysler › 2009 › 300 C, AWD › Repair and Diagnosis › External Pages › Different car › Section 222 (Battery System) › Battery System › Inspection › Battery System

Battery System

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

The following information details the recommended inspection procedures for the battery and related components. In addition to the maintenance schedules, it is recommended that these procedures be performed any time the battery or related components are removed for vehicle service. Refer to DESCRIPTION .

  1. Inspect the battery cable terminals for damage. Replace any battery cable that has a damaged or deformed terminal.
  2. Inspect the battery tray and battery holddown hardware for damage. Replace any damaged parts.
  3. Inspect the battery case for cracks or other damage that could result in electrolyte leaks. Also, check the battery terminals for looseness. Batteries with damaged cases or loose terminals must be replaced.
  4. Inspect the battery built-in test indicator sight glass (if equipped) for an indication of the battery condition. If the battery is discharged, charge as required. See STANDARD PROCEDURE .
About FixVault