Fuse Block
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO RESTRAINTS - SERVICE INFORMATION
BEFORE ATTEMPTING ANY STEERING COLUMN OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
- Install the new wire harness and fuse block.
- Re-trim the instrument panel with what was necessary for harness removal.
- Install instrument panel into vehicle. Refer to INSTALLATION
.
Ensure that the wire terminals and connectors are in good condition and connectors are properly installed.
- Connect the battery negative cable.